Featured

  • China Wholesale Strut Channel L Shape Fitting Pricelist –  Standard C-section steel for unistrut is hot-dip galvanized, plastic sprayed and electro galvanized. Thickness 1.8-3.0 – Zhanyu

    China Wholesale Strut Channel L Shape Fitting Pricelist – Standard C-section steel for unistrut is hot-dip galvanized, plastic sprayed and electro galvanized. Thickness 1.8-3.0 – Zhanyu

    After seismic reinforcement, the mechanical and electrical engineering facilities such as water supply and drainage, fire fighting, heating, ventilation, air conditioning, gas, heat, electricity, communication, etc. can reduce the earthquake damage, reduce and prevent the occurrence of secondary disasters as far as possible, so as to reduce casualties and property losses. If you want to know more about seismic support, please contact us. Zhanyu company welcomes your consultation.
  • China Wholesale Channel Support C Shaped Fittings, Quotes –  Standard C-section steel for unistrut is hot-dip galvanized, plastic sprayed and electro galvanized. Thickness 1.8-3.0 – Zh...

    China Wholesale Channel Support C Shaped Fittings, Quotes – Standard C-section steel for unistrut is hot-dip galvanized, plastic sprayed and electro galvanized. Thickness 1.8-3.0 – Zhanyu

    After seismic reinforcement, the mechanical and electrical engineering facilities such as water supply and drainage, fire fighting, heating, ventilation, air conditioning, gas, heat, electricity, communication, etc. can reduce the earthquake damage, reduce and prevent the occurrence of secondary disasters as far as possible, so as to reduce casualties and property losses. If you want to know more about seismic support, please contact us. Zhanyu company welcomes your consultation.
  • China Wholesale Din933 Hexagonal Bolt And Nut Manufacturers –  Carriage bolt – Zhanyu

    China Wholesale Din933 Hexagonal Bolt And Nut Manufacturers – Carriage bolt – Zhanyu

    Carriage bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M5-M20, length 15mm-300mm,and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, b...
  • China Wholesale unistrut channel Quotes –  Channel /spring nut – Zhanyu

    China Wholesale unistrut channel Quotes – Channel /spring nut – Zhanyu

    Handan Zhanyu Fastener Co., Ltd. is located in the industrial zone of dongmingyang village, Yongnian District, Handan City, Hebei Province. The company covers an area of more than 20000 square meters, with a registered capital of 30 million yuan and more than 220 employees. Main products of the company: bolt, nut, anchor, Self drilling screw, drywall screw, drop in anchor, plastic wing nut, C-shaped steel,thread rod, wedge anchor and other types of fastener products.   The company has ma...
  • China Wholesale Hardware Fasteners Factory –  Carbon steel hexagon bolt – Zhanyu

    China Wholesale Hardware Fasteners Factory – Carbon steel hexagon bolt – Zhanyu

    Hexagon bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M4-M36, and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, black and hot galvan...
  • China Wholesale Bolt Processing Pricelist –  Hexagon flange bolt – Zhanyu

    China Wholesale Bolt Processing Pricelist – Hexagon flange bolt – Zhanyu

    Flange bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M5-M20, length 15mm-300mm,with serrated or not,and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvan...
  • China Wholesale High-Strength Bolt Pricelist –  Hexagon flange bolt – Zhanyu

    China Wholesale High-Strength Bolt Pricelist – Hexagon flange bolt – Zhanyu

    Flange bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M5-M20, length 15mm-300mm,with serrated or not,and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvan...
  • China Wholesale Lock Nut Pricelist –  Flange nut – Zhanyu

    China Wholesale Lock Nut Pricelist – Flange nut – Zhanyu

    Flange nut is a kind of nut with a wide flange at one end, which can be used as an integral washer. This is used to distribute the pressure of the nut over the fixed part, thus reducing the possibility of damage to the part and making it less likely to loosen due to uneven tightening surfaces. Most of these nuts are hexagonal and are made of hardened steel, usually zinc plated. In many cases, the flange is fixed and rotates with the nut. The flange may be serrated to provide locking. The serr...
  • China Wholesale Hex Head Shoulder Bolt Suppliers –  Carbon steel hexagon bolt – Zhanyu

    China Wholesale Hex Head Shoulder Bolt Suppliers – Carbon steel hexagon bolt – Zhanyu

    Hexagon bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M4-M36, and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, black and hot galvan...
  • China Wholesale Din975 Pricelist –  Carbon steel hexagon bolt – Zhanyu

    China Wholesale Din975 Pricelist – Carbon steel hexagon bolt – Zhanyu

    Hexagon bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M4-M36, and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, black and hot galvan...
  • China Wholesale Hex Bolt With Internal Thread Factories –  Hex socket bolt cup head – Zhanyu

    China Wholesale Hex Bolt With Internal Thread Factories – Hex socket bolt cup head – Zhanyu

    Socket bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M5-M20, length 15mm-300mm,and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, bla...
  • China Wholesale Hex Head Screw Bolt Factory –  High strength dry wall screw with white zinc plating / Phosphide black – Zhanyu

    China Wholesale Hex Head Screw Bolt Factory – High strength dry wall screw with white zinc plating / Phosphide black – Zhanyu

    Drywall nails are screw type, but the sales of drywall nails account for one of the most critical products of positive fasteners. Then Shanghai drywall nail manufacturers will introduce the tool to consumers in detail. Also known as wall panel nail, is used to install various gypsum board, ceiling ceiling, light partition, light steel keel, etc. The most distinctive feature of appearance is the shape of the horn head, which is divided into two types: double thread fine tooth dry wall screw an...
  • China Wholesale Round Head Square Neck Bolts Factories –  Hexagon flange bolt – Zhanyu

    China Wholesale Round Head Square Neck Bolts Factories – Hexagon flange bolt – Zhanyu

    Flange bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M5-M20, length 15mm-300mm,with serrated or not,and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvan...
  • China Wholesale Black Bolt Factory –  Carbon steel hexagon bolt – Zhanyu

    China Wholesale Black Bolt Factory – Carbon steel hexagon bolt – Zhanyu

    Hexagon bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M4-M36, and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, black and hot galvan...
  • China Wholesale High Tensile Flange Bolt Suppliers –  Carbon steel hexagon bolt – Zhanyu

    China Wholesale High Tensile Flange Bolt Suppliers – Carbon steel hexagon bolt – Zhanyu

    Hexagon bolt refers to the fastener composed of head and screw. Bolts can be divided into carbon steel bolts and stainless steel bolts according to the material. They need to be matched with nuts to fasten and connect two parts of through holes. The common specifications are M4-M36, and the grades are 4.8, 6.8, 8.8, 10.9 and 12.9. We can do the standard of GB DIN ASTM ANSI, The thread have coarse thread and fine thread, surface treatment includes: galvanized, yellow zinc, black and hot galvan...